 |
 |
|
|
|
|
| Home |
 |
About |
|
News |
|
Contacts |
|
Support |
|
Product |
|
Site Map |
|
|
|
|
|
|
|
|
|
|
QUADRO SPACE LED |
|
DMX LED CONTROLLER |
|||
|
|
|
|
|
|||
|
|
|
Excellent device of direct light. So bright that being equipped with the white mirrors could be used as an anti-aircraft searchlight. The bundles of spinning beams are getting through each other being ruled by the music rhymes. A pair of QUADRO SPACES LED located nearby so they beams could cross create an effect of a dancing color blizzard. | ||||
 |
|
DMX LED Controller is a DMX512 controlled device intended to control LED strips, panels and other LED devices. It uses a patented system of intellectual brightness control - ILedSystem© providing a wider range of LEDs brightness adjustment and no trembling/shivering effects at the video records. |
|
|
PULSAR 5000 |
|
DMX Splitter DS-104 |
|||
|
|
|
|
|
|||
|
|
|
It is a powerful professional 2 lamped strobe intended for creation of spectacular light effects. It can not only flash with the predefined frequency, but also imitate a lightning strike or soft brightness regulation and many other things. It is controlled over the DMX512 protocol from an external control unit or console over the three-pinned XLR connectors. Special technological methods and complicated algorithms making it possible to significantly reduce load to power network. | ||||
 |
|
An indispensable device for the professional installations. Intended for keeping, amplification, branching, complete interconnection, and safety of DMX512 lines. A device enables to branch a single incoming DMX line into four separate and mutually independent channels. It makes it possible to protect DMX lines of failures and induced issues. A devices is enabled with the DMX-transit additional connector. |
|
|
Dimmer Pack DP 4 SE |
|
PD32T3916 |
|||
|
|
|
|
|
|||
|
|
|
A device is designed at rigid metal case suitable for mounting to the wall or to the frame. Power supply is monophase 220V AC. Various adjustments possibilities are available. Can work in two modes – dimmer or switcher. From the preceding DMX Dimmer Pack 4 it differs with the usage of standard euro power sockets as the outputs. A dimmer is available in two versions: 4x1kW and 4x2.2kW. | ||||
 |
|
A device is designed at rigid metal case compatible with RACK 2U standard. Input is three-phase 220V AC over 5-pin 32A CEE power plug. Output lines are 9 monophase 220V 16A covered power sockets protected by circuit breakers of C-class. It has 3 power sockets at the front and 6 at the rear sides. Each phase is wired to 3 power sockets. Indicators showing current at each output. Rated total power of loads is up to 7 kW per phase, total is up to 21 kW. |
|
|
PD63C3332 |
|
PD32C1416 |
|||
|
|
|
|
|
|||
|
|
|
A device is designed at rigid metal case compatible with RACK 3U standard. Input is three-phase 220-380V AC over 5-pin 63A CEE power plug. Output lines are 3 5-pin 32A CEE power plugs. Indicators showing current at each output. All output sockets are mounted at the front panel. Rated total power of loads is up to 13.8 kW per phase, total is up to 41.5 kW. Protection class is IP44. | ||||
 |
|
A device is designed at rigid metal case and equipped with 4 monophase 220V AC 16A (3.5kW) covered power sockets. Input is three-core wire with 4mm2 section and output is 32A professional plug. Input is protected with a circuit breaker. There are 2 LED indicators of power: one before the circuit breaker and another after it. Rated total power of loads is up to 7 kW per phase. Type and manufacturer of input/output power sockets is negotiable. Protection class is IP44. |
|
|
PD32T3616 |
|
PD32C3616 |
|||
|
|
|
|
|
|||
|
|
|
A device is designed at rigid metal case and could be mounted at any position, equipped with output power sockets mechanical damages protection. Input is three-phase 220V AC over 32A CEE covered power plug. Output lines are 6 front side mounted monophase 220V 16A covered power sockets up suitable for loads up to 3.5kW. Each phase is wired to two power sockets. Rated total power of loads is up to 7 kW per phase, total is up to 21 kW. | ||||
 |
|
A device is designed at rigid metal case and could be mounted at any position, equipped with output power sockets mechanical damages protection. Input is three-phase 5-pin 32A CEE covered power plug. Transit output is absent. Output lines are 6 front side mounted monophase 220V 16A covered power sockets up suitable for loads up to 3.5kW. Each phase is wired to two power sockets. Rated total power of loads is up to 7 kW per phase, total is up to 21 kW. |
|
|
PD63C3332 |
|
POWER DISTRIBUTORS |
|||
|
|
|
|
|
|||
|
|
|
A device is designed at rigid metal case compatible with RACK 3U standard. Input is three-phase 220-380V AC over 5-pin 63A CEE power plug. Output lines are 3 5-pin 32A CEE power plugs. Indicators showing current at each output. All output sockets are mounted at the front panel. Rated total power of loads is up to 13.8 kW per phase, total is up to 41.5 kW. Protection class is IP44. | ||||
 |
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
 |
|
|
|
Copyright(c)
1997-2021. All rights reserved. Web-design and development by |
|
|
|
|
|
|