| № |
Parameter |
Value |
|
1 |
Flash frequency |
0 - 7 - Off |
| 8 - 15 - Single
flash |
| 16 - Minimum flash frequency |
255 - Maximum flash frequency
|
2 |
Flash brightness |
0 - Minimum flash brightness |
255 - Maximum flash brightness
|
| 3 |
Modes of operation |
0 - 7 - Normal mode.
The device works like a regular stroboscope.
Channel 1 disables operation (values 0 - 7), or determines the frequency of flashes (values 16 - 255).
Channel 2 determines the brightness of the flashes (values 0 - 255).
|
| |
8 - 15 - Random flash 1.
In this mode, flashes occur at a random time (with a random frequency).
Channel 1 prohibits (values 0 - 7), or allows operation (values 16 - 255).
Channel 2 determines the brightness of the flashes (values 0 - 255).
|
| |
16 - 23 - Random flash 2.
In this mode, flashes occur at a random time (with a random frequency) and with a random brightness.
Channel 1 prohibits (values 0 - 7), or allows operation (values 16 - 255).
Channel 2 does not affect this mode.
|
| |
24 - 87 - Blinder.
Channel 1 prohibits (values 0 - 7), or determines the frequency of glow (values 16 - 255).
Channel 2 determines the brightness of the flashes (values 0 - 255).
Channel 3 value 24 - about 0.5 seconds, value 87 - about 3 seconds.
|
| |
88 - 151 - Random blinder 1.
Random time between glow. Glow duration depending on the value in channel 3 .
Channel 1 prohibits (values 0 - 7), or allows operation (values 16 - 255).
Channel 2 determines the brightness of the glow (values 0 - 255).
Channel 3 value 88 - about 0.5 seconds, value 151 - about 3 seconds.
|
| |
152 - 215 - Random blinder 2.
Random time between illumination, and random glow duration.
Channel 1 prohibits (values 0 - 7), or allows operation (values 16 - 255).
Channel 2 determines the brightness of the glow (values 0 - 255).
Channel 3 just turns on this mode.
|
| |
216 - 223 - Random blinder 3.
Random time between glows, and random duration, random brightness.
Channel 1 prohibits (values 0 - 7), or allows operation (values 16 - 255).
Channel 2 does not affect this mode.
Channel 3 just turns on this mode.
|
| |
224 - 231 - Blinder Min. - Max. - Min.
The brightness of the glow gradually increases and decreases.
Channel 1 prohibits (values 0 - 7), or determines the frequency of illumination (values 16 - 255).
Channel 2 defines the maximum brightness of the glow (values 0 - 255).
Channel 3 just turns on this mode.
|
| |
232 - 239 - Blinder Min. - Max.
The brightness of the glow increases smoothly, goes out sharply.
Channel 1 prohibits (values 0 - 7), or determines the frequency of glow (values 16 - 255).
Channel 2 defines the maximum brightness of the glow (values 0 - 255).
Channel 3 just turns on this mode.
|
| |
240 - 247 - Blinder Max. - Min.
The brightness of the glow gradually decreases after a sharp tanning.
Channel 1 prohibits (values 0 - 7), or determines the frequency of illumination (values 16 - 255).
Channel 2 defines the maximum brightness of the glow (values 0 - 255).
Channel 3 just turns on this mode.
|
| |
248 - 255 - Lightning.
Simulates flashes of lightning in a thunderstorm.
Channel 1 disables (values 0 - 7), or determines the frequency of flashes (values 16 - 255).
Channel 2 does not affect this mode.
Channel 3 just turns on this mode.
|
