Home About News Contacts Support Product Site Map
PRO LINE POWER LINE DISCO LINE LED LINE Mini SERIES DECO LINE
       
UA RU

 POWER DISTRIBUTORS

  Anything that lights, plays or entertains us in any other way requires plugging into the power socket. While there are just a couple of devices it is enough to use a regular house hold extension cord. But once the quantity of devices is getting bigger and DMX enabled devices appear there arises a question: where to plug in them all? DLL has an answer for that question: we have everything to create a power supply network of any complexity level.

 

End-line three-phase splitter PD63C3332

     A device is designed at rigid metal case compatible with RACK 3U standard. Input is three-phase 220-380V AC over 5-pin 63A CEE power plug. Output lines are 3 5-pin 32A CEE power plugs. Indicators showing current at each output. All output sockets are mounted at the front panel.
Rated total power of loads is up to 13.8 kW per phase, total is up to 41.5 kW.
Protection class is IP44.
Weight 3,8 kg.

 

End-line three-phase splitter PD32C1416

     A device is designed at rigid metal case and equipped with 4 monophase 220V AC 16A (3.5kW) covered power sockets. Input is three-core wire with 4mm2 section and output is 32A professional plug. Input is protected with a circuit breaker.
    There are 2 LED indicators of power: one before the circuit breaker and another after it.
Rated total power of loads is up to 7 kW per phase.
Type and manufacturer of input/output power sockets is negotiable.
Protection class is IP44.

 

End-line three-phase splitter PD32T3916

     A device is designed at rigid metal case compatible with RACK 2U standard. Input is three-phase 220V AC over 5-pin 32A CEE power plug.
    Output lines are 9 monophase 220V 16A covered power sockets protected by circuit breakers of C-class. It has 3 power sockets at the front and 6 at the rear sides. Each phase is wired to 3 power sockets.
    Indicators showing current at each output. Rated total power of loads is up to 7 kW per phase, total is up to 21 kW.
Type and manufacturer of input/output power sockets is negotiable.

 

End-line three-phase splitter PD32C3916

     A device is designed at rigid metal case compatible with RACK 2U standard.
    Input is three-phase 220V AC over 5-pin 32A CEE power plug.
Output lines are 9 monophase 220V 16A covered power sockets up suitable for loads up to 3.5kW and protected by circuit breakers of C-class and Shuko grounding. It has 3 power sockets at the front and 6 at the rear sides. Each phase is wired to 3 power sockets.
    Indicators showing current at each output. Rated total power of loads is up to 7 kW per phase, total is up to 21 kW.
Type and manufacturer of input/output power sockets is negotiable.

 

Transit three-phase splitter

     A device is designed at rigid metal case and could be mounted at any position, equipped with output power sockets mechanical damages protection.
    Input is three-phase 220V AC over 32A CEE covered power plug. Transit output and output power sockets are with no protection.
    Output lines are 6 front side mounted monophase 220V 16A covered power sockets up suitable for loads up to 3.5kW. Each phase is wired to two power sockets.
    Rated total power of loads is up to 7 kW per phase, total is up to 21 kW.
Type and manufacturer of input/output power sockets is negotiable.

 

End-line three-phase splitter PD32C3616

     A device is designed at rigid metal case and could be mounted at any position, equipped with output power sockets mechanical damages protection.
    Input is three-phase 5-pin 32A CEE covered power plug. Transit output is absent. Output lines are 6 front side mounted monophase 220V 16A covered power sockets up suitable for loads up to 3.5kW.
    Each phase is wired to two power sockets.
    Rated total power of loads is up to 7 kW per phase, total is up to 21 kW. Type and manufacturer of input/output power sockets is negotiable.

 

Small 220V splitter

Rated power load is up to 40 kW.
Input is three-phase 5+1 pin socket. Has 380V of phase voltage and 220V of linear voltage. Equipped with LED indication of each phase.
Output sockets are monophase 3-pin 32A by one per phase. Each has own monophase 40A circuit breaker and LED indication of current.
Rated total power of loads is up to 7 kW per phase, total is up to 21 kW. It is possible to mount three monophase sockets instead of a single three-phased one. Type and manufacturer of input/output power sockets is negotiable. Protection class is IP44.

 

  A sample of main power splitter for the tour kit. At the bottom there are 5-pin input socket and voltmeter for each phase, general circuit breaker and a grounding socket. Output sockets are protected by circuit breakers. LED indication of current at each phase. Certain sockets could be equipped with the interference protection unit to be used by delicate consumers like the mixers. Everything is mounted at steel 19”RACK and fixed at transport case. From the rear end there is a cable bay. As the total weight is significant the transportation wheels are available. Rated total power of loads is up to 60kW. It is possible to equip splitters with additional measuring devices in order to organize power splitting network in a most reliable way. Configuration, type, quantity and manufacturer of circuit breakers, kit wiring, additional sockets are negotiable. Protection class is IP44.
 

A sample of main power splitter for the tour kit. At the bottom there are 5-pin input socket and voltmeter for each phase, general circuit breaker and a grounding socket. Output sockets are protected by circuit breakers. LED indication of current at each phase. Certain sockets could be equipped with the interference protection unit to be used by delicate consumers like the mixers. Everything is mounted at steel 19”RACK and fixed at transport case. From the rear end there is a cable bay. As the total weight is significant the transportation wheels are available. Rated total power of loads is up to 60kW. It is possible to equip splitters with additional measuring devices in order to organize power splitting network in a most reliable way. Configuration, type, quantity and manufacturer of circuit breakers, kit wiring, additional sockets are negotiable. Protection class is IP44.  
 

A sample of main power splitter for the tour kit. At the bottom there are 5-pin input socket and voltmeter for each phase, general circuit breaker and a grounding socket. Output sockets are protected by circuit breakers. LED indication of current at each phase. Certain sockets could be equipped with the interference protection unit to be used by delicate consumers like the mixers. Everything is mounted at steel 19”RACK and fixed at transport case. From the rear end there is a cable bay. As the total weight is significant the transportation wheels are available. Rated total power of loads is up to 60kW. It is possible to equip splitters with additional measuring devices in order to organize power splitting network in a most reliable way. Configuration, type, quantity and manufacturer of circuit breakers, kit wiring, additional sockets are negotiable. Protection class is IP44.  
 

Power Line

DP-4 SE DP-4 SE 2 DP-121 DP-66 PD32t3916 PD32C3916 PD32C1416 PD63C3332 LIGHT CONSOLE LIGHT CONSOLE + POWER DISTRIBUTORS  
 

Copyright(c) 1997-2021. All rights reserved. Web-design and development by
DLL Design Group